CBR250R 11-12 NO CUT Frame Slider Installation Instructions Part Numbers: 750-3110, 750-3119, 710-3119, 850-3110C MADE IN THE USA! Carefully read ins
Installation Steps: Some photos in this section are used for illustration examples only. 1. Remove Left and Right mid panels to expose mounting loca
3. Before left side offset is installed pre assemble the offset using two 6 X 1.00 X 60 (99-HB-SH0610060) socket cap bolts and two 25mm offset spacer
4. Mount left side offset (LOOSELY) by hand using all 3 bolts. Tighten both 6 X 1.00 X 60 (99-HB-SH0610060) socket cap bolts (FIRST) then main OEM en
5. Before right side offset is installed pre assemble the offset using two 6 X 1.00 X 60 (99-HB-SH0610060) socket cap bolts and two 22mm (428-9107) &
6. Mount right side offset (LOOSELY) by hand using all 3 bolts. Tighten both 6 X 1.00 X 60 (99-HB-SH0610060) socket cap bolts (FIRST) then main OEM e
8. Mount bodywork. READ CAREFULLY Shogun cannot guarantee that they will protect your motorcycle from any extent of damage. Shogun frame slid
Comments to this Manuals